The device for sharpening of tungsten electrodes of Neutrix
- Customer pickup,
- In detail
Sharpening of tungsten electrodes has to be made by hard disks with a fine grain for avoiding of formation of agnails and grooves at an electrode end face.
The portable Neutrix machine carries out high-precision and high-quality sharpening of tungsten electrodes:
üдля of manual arc welding by the tungsten not melting electrode in the environment of inert gas on direct and alternating current,
Welding üдля arc plasma,
üдля of orbital welding of pipes as a part of automatic welding machines.
Tungsten electrodes which are ground not sharply and it is inexact, cause magnetic indignation, ignition and therefore - an electric arch.
Possibilities of the tool:
üДля of electrodes with a diameter from 1,0 mm to 4,0 mm.
üДля of smooth installation of an angle of sharpening from 15 ° to 180 °.
üC a depth gage for the minimum expense of electrodes.
üДля of electrodes from 15 mm long.
üДля of optimum and exact length of sharpening.
Application üДля as desktop or manual tool.
üCo built-in replaceable filter (type: 8 511 K1. H12) for abrasive dust.
P1 power: 850 W
Speed: the regulated from 11.500 to 27.000 rpm
Noise level: 88,8 dB(A)
Value of vibration: 5 m / с2
Weight: 2,8 kg
Filter cartridge: replaceable filter
Diamond disk: ø 40 mm
By means of the graduated scale of a corner it is possible to establish a desirable corner of an edge of an electrode smoothly. The angles of sharpening from 7,5 to 90 degrees answer corners of an edge from 15 to 180 degrees.
The eccentric disk allows 3-times uses of a diamond disk on three planes of grinding and is design feature of the device.
The exact supply (F) and emphasis (A) on the handle of the holder of an electrode guarantees high-precision and high-quality sharpening of an electrode.
The special collet clip allows to make sharpening of short tungsten electrodes up to 15 mm long (for example, for difficult works and for installations for automatic orbital welding of pipes).
Exact determination of length of wear when sharpening of 0,3 mm is reached by means of adjustable caliber, thus, the minimum expense of electrodes is possible, reduces time for sharpening process, minimizes release of grinding dust and does not wear out a diamond disk. By means of adjustable caliber it is also possible to remove Grata from tungsten electrodes at aluminum welding.
Through an observation port it is possible to watch process of sharpening and to check grinding pressure not to allow annealing of an electrode when sharpening. As a result there would be higher wear of a diamond disk.
The built-in suction and the portable filter for catching of dust are important feature of the device, serving for protection of respiratory organs. In such execution of "Neutrix WAG-40" is the only tool-grinding device for tungsten in the world market.
The regulator of speed of turns the following important feature allowing to choose the optimum speed of sharpening of an electrode depending on its diameter.
The steady basic bed increases stability of the device during sharpening.